ASW-RTS:一种软件性能数据在线检测方法

在软件健康管理系统中,需要对相关被测构件的性能进行在线检测,从而确定构件的健康状态。针对被测构件的性能衰退检测问题,在AR(p)模型基础上,结合时间序列滚动式算法的准确性,提出了一种具有自适性策略的ASWRTS算法,用于对被测构件革新异常类性能数据的在线检测,提高检测的准确度,并基于该算法设计了构件性能异常数据的在线检测过程。实验结果表明,该算法将检测精度提高了50%左右,能够有效在线检测构件的性能衰退,说明了该算法的正确性和有效性。     

A residual based adaptive unscented Kalman filter for fault recovery in attitude determination system of microsatellites

This paper presents an adaptive unscented Kalman filter (AUKF) to recover the satellite attitude in a fault detection and diagnosis (FDD) subsystem of microsatellites. The FDD subsystem includes a filter and an estimator with residual generators, hypothesis tests for fault detections and a reference logic table for fault isolations and fault recovery. The recovery process is based on the monitoring of mean and variance values of each attitude sensor behaviors from residual vectors. In the case of normal work, the residual vectors should be in the form of Gaussian white noise with zero mean and fixed variance. When the hypothesis tests for the residual vectors detect something unusual by comparing the mean and variance values with dynamic thresholds, the AUKF with real-time updated measurement noise covariance matrix will be used to recover the sensor faults. The scheme developed in this paper resolves the problem of the heavy and complex calculations during residual generations and therefore the delay in the isolation process is reduced. The numerical simulations for TSUBAME, a demonstration microsatellite of Tokyo Institute of Technology, are conducted and analyzed to demonstrate the working of the AUKF and FDD subsystem.     

基于划分检测模型的终端区异常轨迹检测方法

针对异常轨迹对轨迹聚类效果的影响以及给进离场程序管制适用性的量化分析提供分析数据的考虑，在结合数据挖掘中异常检测理论的基础上，利用划分检测框架及将距离和密度结合起来，设计了一种有效检测算法，运用到终端区飞行轨迹的异常检测当中，检测出飞行轨迹中的异常轨迹，从而改善轨迹的聚类效果。实例仿真结果表明：方法可以准确地检测出异常轨迹。     

波音737系列飞机过热探测系统原理分析及排故技巧

轮舱火警、机翼及后下部机身的过热探测系统是飞机防火系统的重要组成部分，且故障发生频繁。本文介绍了波音737系列飞机的轮舱火警、机翼及后下部机身的过热探测系统的基本原理及常见故障，并结合外场维修经验介绍了排除该系统故障的一些技巧。     

基于ANSYS的同面多电极电容传感器仿真研究

同面多电极电容传感器是一种新的飞机复合材料构件损伤检测技术,该检测技术的正问题中敏感场分布函数的计算要涉及到静电场中电容计算问题。在仿真研究中,电容要通过场的数值计算方法来求得。本文介绍了如何使用ANSYS有限元分析计算同面多电极电容传感器中的各电极对之间的电容,对检测材料发生异常及传感器参数改变时电容的变化进行了分析,为损伤检测的特征提取和逆问题图像重构提供了仿真数据。     

某火箭发动机故障检测及诊断算法设计分析

针对某型号液体火箭发动机故障检测及诊断软件存在瞬态段（起动段、关机段）故障检测功能缺失、故障诊断无法给出故障量大小的问题，在原软件故障诊断算法——余弦相似度分类的基础上，通过引入故障因子定量给出故障量大小，实现发动机故障诊断的定性定量分析。同时，采用基于统计学基础的包络线算法，通过Python语言对发动机瞬态段故障检测算法进行设计开发，使原软件实现发动机瞬态段故障检测功能。通过仿真试车数据对软件算法进行验证，结果表明优化后的故障诊断功能可实现故障量大小计算，基于包络线算法开发的故障检测功能提高了发动机故障检测效率。     

Hypothesis-test-based landcover change detection using multi-temporal satellite images – A comparative study

Remote sensing images and technologies have been widely applied to environmental monitoring, in particular landuse/landcover classification and change detection. However, the uncertainties involved in such applications have not been fully addressed. In this paper two hypothesis-test-based change detection methods, namely the bivariate joint distribution method and the conditional distribution method, are proposed to tackle the uncertainties in change detection by making decisions based on the desired level of significance. Both methods require a data set of class-dependent no-change pixels to form the basis for class-dependent hypothesis test. Using an exemplar study area in central Taiwan, performance of the proposed methods are shown to be significantly superior to two other commonly applied methods (the post-classification comparison and the image differencing methods) in terms of the overall change detection accuracies. The conditional distribution method takes into consideration the correlation between digital numbers of the pre- and post-images and the effect of the known pre-image digital number on the range of the post-image digital number, and therefore yields the highest change detection accuracy. It is also demonstrated that the class-dependent change detection is crucial for accurate landuse/landcover change detection.     

TEST OF BOARD-LEVEL BOUNDARY SCAN INTEGRITY

ＩＥＥＥ１１４９．１边界扫描为数字电路板级测试提供了所需的对内部节点的控制和观察能力。但是，边界扫描测试结构本身的完整性必须首先加以检测，以保证其他功能测试和诊断结果的正确性。本文论述了板级边界扫描测试存取口的故障模型和测试原理，并针对全边界扫描印制板提出了一种故障覆盖率高、测试时间短的测试算法。     

基于光纤F-P可调谐滤波器的有害气体检测方法

光谱分析法在气体成分监测领域有着广泛的应用,实现小型紧凑高分辨率的光谱测量装置是热门的研究课题。文章创造性的提出了基于光纤法布里-帕罗（F—P）的可调谐滤波器提高吸收光谱分辨率,为构建紧凑高分辨率的光谱仪提供了一种新的方案。基于光纤F-P的可调谐滤波器成功实现了微型光栅光谱仪（分辨率约1nm）对甲烷吸收光谱的测量,对比无光纤F—P可调谐滤波器直接测量的结果,该方法测得的吸收光谱强度至少提高了一个数量级。此研究成果可用于紧凑高分辨率的星载气体检测仪的研制。     

一种遥感图像建筑物检测新方法

遥感图像中的建筑物检测对于土地规划和地图绘制等具有重要意义。文章针对高分辨率全色遥感图像植被覆盖中隐蔽建筑物检测问题,提出了一种结合屋顶结构信息和纹理信息的快速房屋检测方法。首先利用屋顶边缘的几何关系寻找具有矩形屋顶的建筑物;然后使用形态学方法提取屋顶较亮的建筑物;最后利用局部二值模式（Local Binary Pattern,LBP）描述屋顶的纹理特征,并利用支持向量机（Support Vector Machine,SVM）排除误检区域。通过在全色遥感图像集上的试验证明,所提方法对高分辨率遥感图像植被覆盖区域中的建筑物目标具有较高检测率和较低误检率。